Welcome to our forum for the Witbox Go!

  • Welcome to the Witbox Go! forum. This is the best place to talk, discuss and ask any questions about the new 3D printer.

    It’s the first 3D printer featuring an Android operating system, which you can control from either your computer or your smartphone thanks to our own application called Zetup. With this app you can launch any print with just a few clicks. It also features many different sensors which will make 3D printing effortless.

    witbox_go_frontal_ladeada_store_4.jpg


    You can find more information about the Witbox Go! here.

    These are the main characteristics of the printer:

    Operating System

    • Android M

    Processor

    • Qualcomm® Snapdragon™ 410

    Memory

    • 8 GB

    Resolution

    • High, medium and low resolution

    Dimensions

    • Product: (x)300 x (y)255 x (z)480mm
    • Enclosure: (x)405 x (y)350 x (z)540mm
    • Print volume: 140 x 140 x 140 mm

    Extruder mechanics

    • All metal
    • Axial heater
    • Thermal insulation
    • Bowden-system DDG extruder

    General mechanics

    • Magnet-fastened print bed
    • Adhesives not needed (hairspray, tape, etc.)

    Electronics

    • End of filament sensor
    • Clogged nozzle sensor
    • Print bed sensor
    • Auto-levelling via electrical contacts
    • Noise reduction - Trinamic TMC5130 motor drivers
    • Notification LED

    Software

    • Zetup
    • PC: Windows and Linux
    • App.: Android

    Communications

    • Wi-Fi® 802.11 b/g/n
    • NFC - Automatic filament detection
    • Type B micro USB

    Box contents

    • Witbox Go! 3D printer
    • 300g spool of 1.75mm PLA
    • Print bed
    • EU to USA plug adapter
    • USB to micro USB cable
    • Printed test piece
    • Spatula
    • Quick guide and warranty

    Others

    • Certifications CE, EAC
    • Updates via OTA